How to Remove Echo from Audio in Audacity

Whether you are recording a new podcast or filming your next YouTube video, there are a few things to keep in mind. For instance, if you are not careful with your backdrops and overall setting, your recording might pick up unnecessary echo and noise. Luckily, you can remove echo from audio Audacity and reduce reverb Audacity by simply reading this article. So, read until the end to learn the methods for Audacity echo reduction.

How to Remove Echo from Audio in Audacity

Keep reading further to find the steps explaining remove echo from audio in Audacity in detail with useful illustrations for better understanding.

What Causes Audio Echo? 

You are wrong if you think echo in voice recording is a once-in-a-blue-moon phenomenon. It is one of the biggest foes of every voice recorder, whether a singer or rapper. Below are the most common causes of echo in audio recordings:

• Something is wrong with your setup.
• Your microphone is too close to the device speaker, which can cause duplicate sounds.
• You have not used proper voice-absorbing elements in the recording room.
• You are not using a good-quality microphone for recording.
• Bad weather conditions are disrupting your recording.

Also Read: Why Does my Siri Sound Weird?

Can Echo be Removed from Audio?

Yes, you can remove echo from audio in Audacity. But it is not child’s play and is a bit tricky for some users. Keep on reading to learn the methods in detail.

How Do I Get Rid of Echo When Recording Audio?

If you want to avoid echo while recording audio, you have to soften the room. In layman’s language, try to bring more things that can absorb the sound. For instance, blankets, cushions, and sleeping bags are some budget-friendly options.

Why Do I Hear an Echo in Audacity?

There can be several reasons why you are hearing an echo in a sound recording in Audacity. But the most common one is that maybe you are hearing the signal from the soundcard and the same signal from software with a slight delay in delivery.

How to Remove Echo from Audio in Audacity?

Let’s see some of the methods you can use to remove echo from audio in Audacity:

Method 1: Reduce Noise in Audacity

1. Open the Audacity app on your PC or laptop.

2. Select the desired part of the recording from where you need to remove the echo and click on the Effect tab from the top bar.

3. Now, click on Noise Removal and Repair > Noise Reduction.

4. Next, click on Get Noise Profile which will close the window automatically.

5. Again, click on Effect > Noise Reduction to make changes to the values.

Note: The noise reduction slider controls exactly how much background noise you want to reduce. Similarly, sensitivity controls how much noise will be removed and Frequency Smoothing must remain between 1-6 for spoken content.

6. Click on OK to save the changes.

Also Read: How to Fix Latency in Audacity in Windows 10

Method 2: Remove Echo with Noise Gate

If the earlier Noise Reduction method failed to give you desired results, you can try this one to Audacity reduce echo. This method gives better control over other aspects with subtle adjustments.

1. Select your track and click on Effect.

2. Click on Noise Removal and Repair > Noise Gate…

3. Use Preview while adjusting settings and click OK once you are happy with the adjustments.

Method 3: Adjust Compressor

The compressor feature on Audacity helps you bring your audio levels to the same level but without clipping them. This can potentially help to reduce reverb Audacity.

1. Select your track and click on the Effects tab.

2. Then, go to Volume and Compression > Compressor…

3. Adjust the Noise floor value to see if it fits your desired results.

Note: You can also adjust and play with Threshold, Ratio, Attack time, and Release time.

Method 4: Adjust High Pass Filter and Low Pass Filter

If you are dealing with muffled sounds, you can adjust lower frequencies so that high-frequency sounds are automatically enhanced. Similarly, the lower pass filter helps with targeting high-pitched sounds to enhance low frequencies. To adjust this:

1. Select your track and click on Effect.

2. Navigate to EQ and Filters > High Pass Filter or Low Pass Filter to adjust the bar as per your preference.

Also Read: 22 Best Free Podcast Recording Software

Method 5: Use Plug In

You can also perform Audacity echo reduction using a Noisegate plugin. For that, you can take a look at our in-depth guide on How to Install Autotune VST Plugin in Audacity. It is beginner-friendly and covers everything you need to know about the said method.

Recommended:

There is no doubt that you need proper time and dedication to remove echo from audio Audacity and reduce reverb in Audacity. Although it is quite demanding, you can reduce it to an extent with skill and patience. All you have to do is adjust different values and effects and see what helps you with echo reduction. You can let us know any queries or suggestions about any other topic you want us to make an article on. Drop them in the comments section below for us to know.