Introduction

Fix Windows System Components Must be Repaired Issue is a common problem that Windows users face. It occurs when the system components of Windows are damaged or corrupted. This issue can cause a variety of problems, such as slow performance, system crashes, and even data loss. Fortunately, there are several methods that can be used to repair the system components and restore the system to its normal functioning state. In this article, we will discuss the different methods that can be used to fix this issue and how to prevent it from occurring in the future.

Fix Windows System Components Must be Repaired Issue

1. Run the System File Checker (SFC) scan:

a. Press the Windows key + X to open the Power User menu.

b. Select Command Prompt (Admin).

c. Type sfc /scannow and press Enter.

2. Run the DISM scan:

a. Open the Command Prompt (Admin).

b. Type DISM /Online /Cleanup-Image /RestoreHealth and press Enter.

3. Run the Check Disk (CHKDSK) scan:

a. Open the Command Prompt (Admin).

b. Type chkdsk /f /r and press Enter.

4. Perform a clean boot:

a. Press the Windows key + R to open the Run dialog box.

b. Type msconfig and press Enter.

c. Select the Selective startup option.

d. Uncheck the Load startup items checkbox.

e. Click the Services tab.

f. Check the Hide all Microsoft services checkbox.

g. Click Disable all.

h. Click Apply and then OK.

i. Restart your computer.

5. Perform a system restore:

a. Press the Windows key + R to open the Run dialog box.

b. Type rstrui and press Enter.

c. Follow the on-screen instructions to select a restore point.

d. Restart your computer.

Windows updates may improve security and enhance the user experience. But when the developers are going to update the process of an update? Is there any scope for improvement there? No matter what, there’s always some kind of error, missing element, or takes a super long time to complete. Just google Windows update memes, I promise you won’t stop laughing. This time the error is regarding Windows system components. If you are also dealing with the same problem, you are at the right place. We bring you a perfect guide that will help you fix components of Windows operating system errors.

How to Fix Windows System Components Must be Repaired Issue

This problem may occur due to possible reasons listed below;

Corrupted system files.
Fragmented Windows update components.
Unable to verify the Windows installation version.

Method 1: Basic Troubleshooting Steps

Before installing a new update, always check and complete the following basic tasks. Not most of the time, however, it is likely that these minor issues can lead to an error message of components of Windows operating system must be repaired.

Make sure you have more than enough storage space. A minimum of 16-20 GB is required.
Unplug any unnecessary external devices.
Make a backup of your important files and data. Also, delete/uninstall any unwanted apps or files.
Uninstall antivirus software, which may interfere with the update installation.

Method 2: Boot into Safe Mode

Turning on your PC in safe mode will prevent any third-party application to interfere which might be causing the error of windows system components must be repaired. Safe mode boots with only necessary programs and functionality, which automatically restricts unnecessary apps and will help to complete the update process. To boot in safe mode, Read our guide on How to Boot to Safe Mode in Windows 10 to do the same.

If booting into Safe Mode did not fix the issue, then you can also try Windows Update troubleshooter in safe mode from the next method.

Method 3: Run Windows Update Troubleshooter

This troubleshooter will automatically identify all the issues regarding updates and fix any errors that are preventing windows from updating. Follow these steps to run Windows Update troubleshooter.

Try updating it again after it boots. If the error message Windows system components must be repaired continues to occur, proceed to the next method listed below.

Also Read: Fix 0x80004002: No Such Interface Supported on Windows 10

Method 4: Change Date & Time Zone

Not always, but in some cases, the incorrect date and time can cause errors in Windows operating system components must be repaired. To check or change the date and time zone, do the following:

1. Right-click on Windows icon and click on Settings.

2. Go to Time & Language menu.

3. Toggle on both Set time automatically and Set time zone automatically options.

4. Finally, restart the PC and try the installation process again.

Method 5: Repair System Files

Windows system components must be repaired error message can also be caused by missing or corrupted files. The system file checker will scan your entire system for corrupted files and repair them. Deployment Image Servicing and Management or DISM is a diagnostic & command tool and can act as a windows update components tool. This tool can also help in fixing corrupt & damaged files and repair Windows image files including windows update components. Follow our guide to repair system files on Windows 10.

Hopefully, using this Windows update components tool has resolved the error. If not, you may need to reset the Windows system components.

Also Read: How to Fix Windows Update Error 80072ee2

Method 6: Reset Windows System Components

Here are the steps to reset Windows system components.

1. Press Windows key, type Command Prompt and click on Run as administrator.

2. Click on Yes to grant permission.

3. Execute the following commands one after the other to stop BITS, Windows Update, and Cryptographic services:

net stop bits
net stop wuauserv
net stop cryptsvc

Note: Press enter after each command line.

4. After that, execute the following command to delete the qmgr*.dat files.

Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat"

5. Then execute the following command.

cd /d %windir%\system32

This is a bigger step, but don’t worry, it’s easy. To re-register the BITS and Windows Update files, you have to paste multiple commands one after the other shown in the next step below.

6. Paste the following commands, then press the Enter key after each command.

regsvr32.exe atl.dll
regsvr32.exe urlmon.dll
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe jscript.dll
regsvr32.exe vbscript.dll
regsvr32.exe scrrun.dll
regsvr32.exe msxml.dll
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
regsvr32.exe actxprxy.dll
regsvr32.exe softpub.dll
regsvr32.exe wintrust.dll
regsvr32.exe dssenh.dll
regsvr32.exe rsaenh.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe cryptdlg.dll
regsvr32.exe oleaut32.dll
regsvr32.exe ole32.dll
regsvr32.exe shell32.dll
regsvr32.exe initpki.dll
regsvr32.exe wuapi.dll
regsvr32.exe wuaueng.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wups.dll
regsvr32.exe wups2.dll
regsvr32.exe wuweb.dll
regsvr32.exe qmgr.dll
regsvr32.exe qmgrprxy.dll
regsvr32.exe wucltux.dll
regsvr32.exe muweb.dll
regsvr32.exe wuwebv.dll

Note: Do not copy and paste all together, it will not work. You have to copy, paste and press enter key after entering each command.

7. Type the following command to reset Winsock and press the Enter key.

netsh winsock reset

8. Then, execute the following command to set the proxy settings if you are using Windows Server 2003 or Windows XP.

proxycfg.exe -d

9. And lastly, to restart the BITS, Windows Update, and Cryptographic services, run the following commands one after the other:

net start bits
net start wuauserv 
net start cryptsvc

10. Finally, execute the following command to clear the BITS queue if you are using Windows Server 2008 or Windows Vista.

bitsadmin.exe /reset /allusers

Also Read: Fix System Error 5 Access Denied in Windows 10

Method 7: Reset Windows Update Components

Read our guide on How to Reset Windows Update Components on Windows 10 to do so.

Method 8: Reset PC

After trying every method and still couldn’t fix the windows system components error, then another option you can try resetting your PC or a clean installation. Follow our guide on how to reset Windows 10 without losing data.

Recommended:

We hope that this guide was helpful, and you were able to fix Windows system components must be repaired error. Let us know which method worked for you best. If you have any queries or suggestions, then feel free to drop them in the comments section below.

Fix Windows System Components Must be Repaired Issue

If you are seeing an error message that says “Windows System Components must be repaired”, then you are likely dealing with a corrupted system file. This error can be caused by a variety of issues, including a virus or malware infection, a hardware failure, or a software conflict. Fortunately, there are several steps you can take to fix this issue.

Step 1: Run a System Scan

The first step in fixing this issue is to run a system scan. This will help identify any potential viruses or malware that may be causing the problem. You can use a reliable antivirus program to scan your system and remove any malicious files. Additionally, you can use a system optimization tool to scan your system for any potential errors or conflicts.

Step 2: Update Your Drivers

Outdated drivers can also cause this issue. To ensure that your drivers are up to date, you should use a driver update tool. This will scan your system for any outdated drivers and automatically update them to the latest version.

Step 3: Check for Hardware Issues

If you are still seeing the error message after running a system scan and updating your drivers, then you may be dealing with a hardware issue. To check for hardware issues, you should use a hardware diagnostic tool. This will scan your system for any potential hardware problems and help you identify the source of the issue.

Step 4: Repair Windows System Components

If you are still seeing the error message after running a system scan, updating your drivers, and checking for hardware issues, then you may need to repair the Windows system components. To do this, you should use a reliable system repair tool. This will scan your system for any corrupted or damaged system files and repair them.

Conclusion

If you are seeing the “Windows System Components must be repaired” error message, then you should follow the steps outlined above. Running a system scan, updating your drivers, checking for hardware issues, and repairing Windows system components should help you fix this issue.

Introduction