Introduction

If you have encountered an error while trying to fix Windows found drivers for your device, you are not alone. Many users have experienced this issue and have been unable to resolve it. This article will provide you with some tips and tricks to help you troubleshoot and fix the issue. We will discuss the common causes of this error, how to identify the source of the problem, and how to resolve it. We will also provide some additional resources to help you find the right driver for your device. With these tips, you should be able to get your device up and running in no time.

Fix Windows Found Drivers for Your Device but Encountered an Error

1. Check the Device Manager for any errors.

2. Uninstall the driver and reinstall it.

3. Update the driver to the latest version.

4. Check for any Windows updates that may be available.

5. Check for any BIOS updates that may be available.

6. Check for any firmware updates that may be available.

7. Check for any hardware compatibility issues.

8. Check for any software compatibility issues.

9. Check for any hardware or software conflicts.

10. Check for any hardware or software corruption.

When trying to install an update for the Windows 10 drivers, you may encounter the Windows found drivers for your device but encountered an error message. This message is displayed to you because there was an error with the driver update. This error can also appear when you plug in a device to your system, even if Windows found driver software for your device. You can try fixing this error using built-in troubleshooting utilities on Windows 10. Read this article to resolve the issue.

How to Fix Windows Found Drivers for Your Device but Encountered an Error

There are a few possible reasons why Windows found drivers for your device error appear on your system. A few of these reasons are listed below.

Error due to an outdated Windows driver
Error due to a faulty driver installation
Error caused by system files
Error due to incorrect registry keys

The following guide will provide methods to fix Windows found driver software for your device errors.

Method 1: Restart PC

The basic troubleshooting for any issues would be restarting your device. This would easily fix any temporary glitches. Follow the below steps:

1. Press the Windows key and click on the Power option.

2. Select Restart.

Method 2: Run Hardware and Devices Troubleshooter

Windows 10 has an in-built troubleshooter to deal with various system errors. The Windows 10 troubleshooter can be very helpful in resolving driver issues on your system. Check out the How to Run Hardware and Devices Troubleshooter to fix issues guide to run the troubleshooter on Windows 10.

Method 3: Update Device Drivers

The most effective solution to Windows found drivers for your device but encountered an error is to update your computer drivers. You can easily update Windows 10 drivers from the Device Manager.

Option I: Update Drivers Automatically

You can follow these simple steps to update your Windows 10 drivers safely. Read our guide on How to Update Device Drivers on Windows 10 to update device drivers on Windows 10.

Also Read: Fix The Request Failed Due to a Fatal Device Hardware Error

Option II: Update Driver Manually

One of the most effective solutions to Windows found drivers for your device but encountered an error issue is manually installing the drivers. You can perform the manual installation of your computer drivers from the Device Manager utility. Follow these simple steps to install the drivers safely.

1. Press the Windows key, type Device Manager and click on Open.

2. Right-click on the problematic driver (e.g. Intel(R) Dynamic Platform and Thermal Framework Chipset Participant) and select Update driver.

3. Click on Browse my computer for drivers.

4. Enter the following location in the Search for drivers in this location and click on Next.

C:\Windows\WinSxS

Your computer will look for a driver update in this location.

Method 4: Reinstall Device Drivers

The faulty installation of the driver can also cause Windows found driver software for your device but encountered an error issue. You can also try to uninstall and reinstall the problematic driver to prevent this error. Read our guide on How to Uninstall and Reinstall Drivers on Windows 10 and implement the same.

Also Read: What is a Device Driver? How Does It Work?

Method 5: Repair System Files

There might be issues with the system files, which can be resolved using the in-built tools. Read our guide on How to Repair System Files on Windows 10, and follow the steps as instructed to repair all the corrupt files on your computer.

Wait for the commands to be executed and check if Windows found drivers for your device but encountered an error issue has been resolved.

Method 6: Provide Full Control to TrustedInstaller

TrustedInstaller utility is an inbuilt user account. This user account is available for Windows 7, Windows 8, Windows Vista, and Windows 10. This account consists of various system files such as Program files and Windows folders. You need to give full control to the TrustedInstaller to resolve the driver issues by system troubleshooting. You can follow these simple steps to give TrustedInstaller full control.

1. Press the Windows + E keys simultaneously to open File Explorer.

2. Double-click on Local Disk (C:) to open the folder.

3. Now, open the Windows folder by double-clicking on it.

4. Navigate and right-click on the System32 folder and select Properties.

5. Go to the Security tab and click on the Edit button.

Note: Give the Edit button the administrator permission (if asked).

6. Under Groups or user names, select TrustedInstaller.

7. In the Permissions for TrustedInstaller, check the Allow box next to the Full control.

8. Repeat the same steps for the SysWOW64 folder in the Windows folder of Local Disk (C:).

Also Read: Fix Multimedia Audio Controller Driver Issue

Method 7: Install Using Hidden Administrator Account

If updating manually does not help you to fix Windows found drivers for your device but encountered an error, then install using a hidden administrator account. This would give more hidden advantages. Follow the below steps:

1. Firstly, reboot the PC.

2. On the log-in screen, hold the Shift key.

3. Select Troubleshoot, followed by Advanced options.

4. Now, choose the Command Prompt option.

5. Type the following command and press the Enter key.

net user administrator /active:yes

6. Now, log in to this account and install the driver.

7. After installing the driver, press the Windows key. Type Command Prompt and click on Run as administrator.

8. Type the given command and hit the Enter key to disable the admin rights.

net user administrator /active: no

9. Finally, restart the PC and log into the main account you always use.

Also Read: Fix The Active Directory Domain Services is Currently Unavailable

Method 8: Modify Registry Editor Keys

Incorrect or corrupt registry keys might cause this Windows found drivers for your device but encountered an error issue. Deleting keys for filter drivers might resolve the issue. To make changes in the registry keys, you need to know the GUID of the driver. Follow the below steps.

Note: Make a backup of registry keys to restore to previous settings in case of manual errors during modification.

1. Launch the Device Manager.

2. Right-click on the problematic driver and select Properties.

3. Go to the Details tab. Select Class Guid in the Property drop-down.

4. Note down the Value displayed.

5. Now, press Windows + R keys to open the Run dialog box.

6. Enter regedit and hit the Enter key to open the Registry Editor window.

7. Click on Yes in the prompt.

8. Navigate to the following key folder path.

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class

9. Find the Value noted in the Value column and click on it.

10. Right-click on UpperFilters and select the Delete option.

Note: If you can’t find UpperFilters, look for LowerFilters.

11. Confirm the warning prompt and reboot the PC.

Frequently Asked Questions (FAQs)

Q1. What are Windows drivers?

Ans. Windows drivers are an essential part of your computer system. Drivers are software components to your system and establish communication between the device and the computer’s operating system.

Q2. From where can I update drivers on Windows 10?

Ans. You can go to Device Manager on your computer to see the list of all the active drivers on your computer. From the Device Manager, you can also update your drivers.

Q3. Can I install new drivers on Windows 10?

Ans. Yes, you can install new drivers to your Windows 10 PC either manually or with the help of a system utility.

Recommended:

We hope this guide was helpful and you were able to fix Windows found drivers for your device but encountered an error issue. Comment down and let us know which method worked for you. Also, if you have questions, queries, or suggestions, feel free to share them with us.

Fix Windows Found Drivers for Your Device but Encountered an Error

If you are trying to install a driver for your device but encounter an error, there are a few steps you can take to try and fix the issue. This article will provide you with some tips on how to troubleshoot and fix Windows found drivers for your device but encountered an error.

Check the Device Manager

The first step you should take is to check the Device Manager. This is a tool that can be used to view all the hardware devices connected to your computer. To open the Device Manager, press the Windows key + R, type “devmgmt.msc” and press Enter. Once the Device Manager is open, look for any devices with a yellow exclamation mark next to them. This indicates that there is a problem with the device and it needs to be fixed.

Update the Driver

If you find a device with a yellow exclamation mark, you can try to update the driver. To do this, right-click on the device and select “Update Driver”. Windows will then search for an updated version of the driver and install it if one is available. If the driver is already up to date, you may need to try a different version of the driver.

Uninstall and Reinstall the Driver

If updating the driver does not work, you can try uninstalling and reinstalling the driver. To do this, right-click on the device and select “Uninstall”. Once the driver is uninstalled, restart your computer and then reinstall the driver. You can download the latest version of the driver from the manufacturer’s website.

Check for Windows Updates

If you are still having issues with the driver, you should check for Windows updates. To do this, open the Settings app and go to “Update & Security”. Click “Check for Updates” and Windows will search for any available updates. If any updates are found, install them and then try installing the driver again.

Contact the Manufacturer

If you are still having issues with the driver, you should contact the manufacturer of the device. They may be able to provide you with a newer version of the driver or provide you with additional troubleshooting steps.

Conclusion

If you are trying to install a driver for your device but encounter an error, there are a few steps you can take to try and fix the issue. Check the Device Manager for any devices with a yellow exclamation mark, update the driver, uninstall and reinstall the driver, check for Windows updates, and contact the manufacturer for additional help. Hopefully, these tips will help you fix Windows found drivers for your device but encountered an error.

Introduction