Introduction
Fixing VDS Error Code 490 01010004 in Windows 10 can be a daunting task. This error code is usually caused by a corrupted or missing system file, or a problem with the Windows registry. Fortunately, there are several methods you can use to fix this error code and get your computer running smoothly again. In this article, we will discuss the different methods you can use to fix VDS Error Code 490 01010004 in Windows 10. We will also provide some tips on how to prevent this error from occurring in the future.
Fix VDS Error Code 490 01010004 in Windows 10
The VDS Error Code 490 01010004 is a common error that occurs when trying to access a virtual disk. This error is usually caused by a corrupted or missing driver. To fix this error, you can try the following steps:
1. Update your Windows 10 system.
2. Uninstall and reinstall the Virtual Disk Service (VDS).
3. Run the System File Checker (SFC) scan to repair any corrupted system files.
4. Run the DISM tool to repair any corrupted system components.
5. Reinstall the Virtual Disk Service (VDS).
6. Restart your computer.
7. Check if the error is resolved.
If the error persists, you can try to reset the Virtual Disk Service (VDS) using the command prompt. To do this, open the command prompt as an administrator and type the following command:
sc config vds start= demand
Once the command is executed, restart your computer and check if the error is resolved.
You may see the VDS basic provider error unexpected failure message on Windows 10; this error was first noticed in a KB979391 update. However, there was no direct resolution to resolve this error. Mostly, users get an error code 490 01010004 when they get a VDS error. You can follow various methods to resolve the VDS provider errors on your computer.
How to Fix VDS Error Code 490 01010004 in Windows 10
There are a few reasons for error code 490 01010004 to appear on your computer. A few of them are mentioned below:
- Nonfunctioning of Virtual Disk service
- Incorrect permission to Virtual Disk service
- Faulty VDS system utility
- Issues due to VDS trace
- Corrupt system files
- Windows is not updated
- Issues due to Virtual Drive software
The following guide will give you methods to resolve error code 490 01010004 on your computer.
Method 1: Restart VDS Provider
The first method you would want to use to resolve the VDS provider error is to restart the VDS basic provider. You can follow these simple steps to restart the VDS basic provider safely.
1. Press the Windows + R keys together to launch the Run dialog box.
2. Type services.msc and hit the Enter key to open the Services window.
3. In the Services window, locate Virtual Disk.
4. Right-click on the Virtual Disk, and click on Restart.
Note: You can also locate Restart the service in the left-side menu.
5. Finally, reboot the PC and check if the error has been resolved.
Method 2: Allow VDS Provider to Interact with Desktop
A different approach to fixing the VDS basic provider error unexpected failure is to make sure that the VDS basic provider is functioning properly. You may receive errors if the VDS provider is not allowed to interact with the desktop. You can follow these simple steps to allow VDS basic provider to interact with the desktop.
1. Launch the Run dialog box, type services.msc and hit Enter key to open the Services window.
2. Here, right-click on the Virtual Disk service.
3. Then, select the Properties.
4. In the General tab, select Startup type as Automatic, and ensure the Service status is Running.
5. Now navigate to Log On tab, and check the box at Allow service to interact with desktop.
6. Click on Apply and OK. Finally, reboot the PC.
If you continue to receive the error code 490 01010004, move on to the next method.
Also Read: Fix Error Code 0x80070490 in Windows 10
Method 3: Stop VDS Trace
To perform a troubleshoot to resolve error code 490 01010004 issue with the VDS provider, you can try to stop the VDS trace on your computer. You can follow these simple steps to stop the VDS trace safely.
1. Press Windows key, type cmd and click on Open to launch the Command Prompt.
2. Type the following command and hit the Enter key.
md %systemroot%\system32\LogFiles\VDS
3. Then, type the given command and press the Enter key.
Logman start vds -o %systemroot%\system32\LogFiles\VDS\VdsTrace.etl -ets -p {012F855E-CC34-4da0-895F-07AF2826C03E} 0xffff 0xff
After entering these commands, reproduce the problem.
4. Finally execute the following command to stop the VDS trace.
Logman stop vds -etsTrace file Vds
Also Read: Fix Windows Update Service Could Not be Stopped
Method 4: Repair System Files
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Method 5: Repair Windows with Media Creation Tool
To fix the error code 490 01010004, you can try to repair the Windows with the help of the Microsoft Media Creation Tool. Follow these simple steps to repair the Windows.
1. Download the Microsoft Media Creation Tool.
2. After successfully downloading Run the tool and click on Upgrade this PC now.
3. Select Keep all my files and apps options.
4. Click on Update.
5. Wait for the update to finish and restart the PC.
Also Read: Fix Windows Update Error 0x800704c7
Method 6: Modify Registry Keys
If the previous methods do not work to fix error code 490 01010004, you can try to modify the SPTD key folder in Registry Editor.
Note: Removing the Virtual Drive software may leave an SPTD.sys driver on your computer. This drive has caused an array of VDS errors on Windows computers. You can modify Windows Registry to disable the SPDT.sys driver on your computer.
You can follow these simple steps to disable the SPTD.sys driver.
1. Press Windows + R keys simultaneously to open the Run dialog box.
2. Here, type regedit and hit the Enter key to launch the Registry Editor.
3. In the Registry Editor window, navigate and click on HKEY_LOCAL_MACHINE.
4. Now, navigate and click on the System folder.
5. Now, navigate and click on the CurrentControlSet folder.
6. Then, click on the Services folder.
7. Then, click on the Sptd folder.
8. Right-click on the Start DWORD file and click Modify…
9. Change the Value data to 4.
Also Read: Fix Windows 10 Update Stuck or Frozen
Method 7: Perform System Restore
If none of those mentioned above methods works, you can try to perform a system restore. You can check out the How to use System Restore on Windows 10 guide to restore your Windows 10 system safely.
Frequently Asked Questions (FAQs)
Q1. What causes VDS provider error on Windows 10?
Ans. Various system errors can cause VDS basic provider errors; some common reasons include faulty Windows updates and corrupt system files.
Q2. What is meant by Virtual Disk Service?
Ans. Virtual Disk service is a technology developed by Microsoft. This technology helps extend Windows’s existing storage capacity.
Q3. How can you repair VDS basic provider?
Ans. You can repair the VDS basic provider with the help of a repair utility. You can download a VDS provider repair utility from the internet.
Recommended:
We hope this guide was helpful, and that you were able to fix VDS error code 490 01010004 issues on your computer. Comment down and let us know which method worked for you the best. Also, if you have questions, queries, or suggestions, feel free to share them with us.
Fix VDS Error Code 490 01010004 in Windows 10
If you are seeing the VDS Error Code 490 01010004 in Windows 10, you are not alone. This error is quite common and can be caused by a variety of issues. Fortunately, there are a few steps you can take to try and fix the problem.
What Causes VDS Error Code 490 01010004?
The VDS Error Code 490 01010004 is usually caused by a problem with the Volume Shadow Copy Service (VSS). VSS is a Windows service that is responsible for creating and managing shadow copies of files and folders. When this service is not working properly, it can cause the VDS Error Code 490 01010004.
How to Fix VDS Error Code 490 01010004
The first step to fixing the VDS Error Code 490 01010004 is to make sure that the Volume Shadow Copy Service is running properly. To do this, open the Services window by typing “services.msc” in the Start menu search box. Once the Services window is open, scroll down to the Volume Shadow Copy service and make sure that it is running. If it is not running, right-click on it and select “Start”.
If the Volume Shadow Copy service is already running, you can try restarting it. To do this, right-click on the service and select “Restart”. Once the service has been restarted, check to see if the VDS Error Code 490 01010004 is still present.
If the error is still present, you can try running the System File Checker (SFC) tool. This tool will scan your system for any corrupted or missing system files and replace them with the correct versions. To run the SFC tool, open the Command Prompt window by typing “cmd” in the Start menu search box. Once the Command Prompt window is open, type “sfc /scannow” and press Enter. The SFC tool will then scan your system and replace any corrupted or missing system files.
If the SFC tool does not fix the VDS Error Code 490 01010004, you can try running the DISM tool. The DISM tool is similar to the SFC tool, but it can also repair corrupted system files. To run the DISM tool, open the Command Prompt window and type “DISM /Online /Cleanup-Image /RestoreHealth” and press Enter. The DISM tool will then scan your system and repair any corrupted system files.
If the VDS Error Code 490 01010004 is still present after running the SFC and DISM tools, you can try performing a system restore. System restore will restore your system to a previous state, which may fix the VDS Error Code 490 01010004. To perform a system restore, open the Control Panel and select “System and Security”. Then, select “System” and click on “System Protection”. Finally, select “System Restore” and follow the on-screen instructions.
If the VDS Error Code 490 01010004 is still present after performing a system restore, you can try performing a clean boot. A clean boot will start Windows with a minimal set of drivers and startup programs, which may help to fix the VDS Error Code 490 01010004. To perform a clean boot, open the System Configuration window by typing “msconfig” in the Start menu search box. Once the System Configuration window is open, select the “Selective startup” option and uncheck the “Load startup items” checkbox. Then, click “OK” and restart your computer.
If the VDS Error Code 490 01010004 is still present after performing a clean boot, you can try performing a repair install of Windows 10. A repair install will reinstall Windows 10 without affecting your personal files, settings, and installed programs. To perform a repair install, open the Settings app and select “Update & Security”. Then, select “Recovery” and click on “Get started” under the “Reset this PC” section. Finally, follow the on-screen instructions to perform a repair install of Windows 10.
If the VDS Error Code 490 01010004 is still present after performing a repair install, you can try performing a full reinstall of Windows 10. A full reinstall will erase everything on your computer and reinstall Windows 10 from scratch. To perform a full reinstall, open the Settings app and select “Update & Security”. Then, select “Recovery” and click on “Get started” under the “Reset this PC” section. Finally, follow the on-screen instructions to perform a full reinstall of Windows 10.
If the VDS Error Code 490 01010004 is still present after performing a full reinstall, you may need to contact Microsoft Support for further assistance. Microsoft Support can help you diagnose and fix the problem.
