Introduction
Fix The Group or Resource is Not in the Correct State to Perform the Requested Operation is an error message that can occur when attempting to access a shared folder or resource on a Windows network. This error can be caused by a variety of issues, including incorrect permissions, incorrect network settings, or a corrupted user profile. In this guide, we will discuss the various causes of this error and provide steps to help you troubleshoot and resolve the issue.
Fix The Group or Resource is Not in the Correct State to Perform the Requested Operation
1. Check the permissions of the group or resource.
2. Ensure that the group or resource is enabled.
3. Check the status of the group or resource.
4. Restart the service or application associated with the group or resource.
5. Check the network connection and firewall settings.
6. Check the system logs for any errors related to the group or resource.
7. Check for any pending updates or patches that need to be applied.
8. Check for any corrupt files or settings related to the group or resource.
9. Check for any conflicts with other applications or services.
10. If all else fails, reinstall the application or service associated with the group or resource.
If you are trying to perform Windows Update in your PC, then you may face an error which states The group or resource is not in the correct state to perform the requested operation. OK. This issue also occurs while using a hotspot or any Microsoft Store apps and even in the Command Prompt. If you face this error statement then, do not worry! In this article, we have shown how to fix the group or resource is not in the correct state to perform the requested operation error in Windows 10. Continue reading to know the troubleshooting methods to solve this problem.
How to Fix The Group or Resource is Not in the Correct State to Perform the Requested Operation
Here we have listed the possible reasons that cause the said error.
- Outdated Network Driver
- Incorrect Network Settings
- Windows Update Bugs
- Conflicted Programs
- Corrupt System Files
Follow the given troubleshooting methods to fix the issue in Windows 10.
Method 1: Perform Clean Boot
The most basic thing to do is to clean boot the Windows. This can solve any bugs with the Windows boot. Follow our guide to perform clean boot in Windows 10.
Method 2: Run Program Compatibility Troubleshooter
If you face the group or resource is not in the correct state to perform the requested operation error while running any programs, then try to run program compatibility troubleshooter to fix any issues with the programs. Following are the steps to run the program compatibility troubleshooter.
1. Press Windows + I keys simultaneously to launch Settings.
2. Click on the Update & Security setting.
3. Go to Troubleshoot menu in the left pane.
4. Select the Program Compatibility Troubleshooter and click on Run the troubleshooter.
5. Wait for the troubleshooter to detect issues if any.
6. Finally, click on Try recommended settings option.
Also Read: Fix Error 0X800703ee on Windows 10
Method 3: Update Network Driver
Corrupt Network driver is one of the main reasons that causes the group or resource is not in the correct state to perform the requested operation error. So to solve this problem, you need to update the network device drivers. Read our guide on how to update network drivers on Windows 10.
Method 4: Repair System Files
Errors in your system files can be fixed by running SFC (System File Checker) and DISM (Deployment Image Servicing and Management) scans. This will solve the issues while using File Explorer. Follow our guide to repair system files on Windows 10.
Also Read: Fix DISM Host Servicing Process High CPU Usage
Method 5: Modify Network Sharing Setting
While using a mobile hotspot you may face the group or resource is not in the correct state to perform the requested operation error. You need to modify your network sharing settings if it is so. Here are the steps to allow other network users to connect to your network.
1. Launch the Run dialog box by pressing Windows + R keys together.
2. Type ncpa.cpl and hit Enter key to open Network Connections window.
3. Right-click on your active network adapter and click on Properties.
4. Go to the Sharing tab.
5. Here, check the Allow other network users to connect through this computer’s internet connection option.
Method 6: Perform System Restore
Another method is to restore your computer to its previous version to fix the group or resource is not in the correct state to perform the requested operation error. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated. In the end, your computer will be restored to a previous state where it does not face any errors at all.
Also Read: Fix The Feature You Are Trying to Use is on a Network Resource That is Unavailable
Method 7: Reset PC
If your computer deals with severe corrupt Windows components, an efficient way to clean all these corrupt components and boot your data is to repair the PC as instructed in our guide How to Reset Windows 10 Without Losing Data. Follow as instructed in this article and at the end, you would have fixed the discussed error.
Recommended:
We hope that this guide was helpful and you could fix the group or resource is not in the correct state to perform the requested operation in Windows 10. Feel free to reach out to us with your queries and suggestions via the comments section below. Also, let us know what you want to learn next.
Fixing the Group or Resource Not in the Correct State to Perform the Requested Operation
If you are trying to perform an operation on a group or resource and you receive an error message that the group or resource is not in the correct state to perform the requested operation, there are a few steps you can take to try and fix the issue.
Step 1: Check the Status of the Group or Resource
The first step is to check the status of the group or resource. You can do this by opening the Group Policy Management Console (GPMC) and navigating to the group or resource in question. Once you have located the group or resource, right-click on it and select Properties. In the Properties window, you will see the Status field. If the status is set to Disabled, then the group or resource is not in the correct state to perform the requested operation.
Step 2: Enable the Group or Resource
If the status of the group or resource is set to Disabled, you can enable it by right-clicking on the group or resource and selecting Enable. This will put the group or resource in the correct state to perform the requested operation.
Step 3: Check the Permissions of the Group or Resource
If the status of the group or resource is set to Enabled, you should check the permissions of the group or resource. To do this, right-click on the group or resource and select Properties. In the Properties window, select the Security tab. Here, you can view the permissions that have been set for the group or resource. If the permissions are not set correctly, you can modify them to allow the requested operation.
Step 4: Check the Dependencies of the Group or Resource
If the status and permissions of the group or resource are set correctly, you should check the dependencies of the group or resource. To do this, right-click on the group or resource and select Properties. In the Properties window, select the Dependencies tab. Here, you can view the other groups or resources that the group or resource is dependent on. If any of these dependencies are not in the correct state, the group or resource will not be able to perform the requested operation.
Conclusion
If you receive an error message that the group or resource is not in the correct state to perform the requested operation, you can use the steps outlined above to try and fix the issue. By checking the status, permissions, and dependencies of the group or resource, you can ensure that it is in the correct state to perform the requested operation.
