How to Learn to Program in Python with a Raspberry Pi?

1. Install the Raspberry Pi operating system: The first step to learning to program in Python with a Raspberry Pi is to install the Raspberry Pi operating system. This can be done by downloading the Raspberry Pi OS image from the official Raspberry Pi website and writing it to an SD card.

2. Connect the Raspberry Pi to your network: Once the Raspberry Pi OS is installed, you will need to connect the Raspberry Pi to your network. This can be done by connecting an Ethernet cable to the Raspberry Pi and connecting it to your router.

3. Install Python: The next step is to install Python on the Raspberry Pi. This can be done by running the command “sudo apt-get install python” in the terminal.

4. Learn the basics of Python: Once Python is installed, you can begin to learn the basics of the language. This can be done by reading tutorials online or taking an online course.

5. Start coding: Once you have a basic understanding of Python, you can start coding. This can be done by writing simple programs and running them on the Raspberry Pi.

6. Experiment: As you become more comfortable with Python, you can start experimenting with more complex programs. This can be done by exploring the Raspberry Pi’s GPIO pins and connecting external hardware to the Raspberry Pi.

Learning Python is an important step to use a Raspberry Pi efficiently. But it’s not straightforward to learn if you start from scratch.
I’m a web developer, so I’m good with coding, and I’ll share with you some tips for getting started quickly with Python.

The Raspberry Pi system includes an IDE to code in Python, the basic libraries are pre-installed, and the GPIO pins are perfect to experiment. There a few steps to follow to understand the Python code, but it’s not so complicated.

I will try to write this article to help both beginners in programming and beginners in Python (but who already know other languages).
It’s up to you to adapt the rhythm of reading to your level. If you already code with other languages, the snippets may be enough to catch the syntax.

By the way, if you get overwhelmed as soon as Python is required for a project, I recommend checking out my e-book “Master Python on Raspberry Pi“. It will guide you step-by-step to learn the essential concepts (and only the essential concepts) required to achieve any project in the future. Raspberry Pi without Python is like a car without an engine, you miss all the fun parts. Get 10% off by downloading it today!

Link between Python and Raspberry Pi

Python introduction

Python is a high-level language to program all kinds of software (like C, C++ or other languages).
It’s similar to a bash script because you can run it directly.
Most of the Python source code have a .py filename extension, and you can run it using “python file.py”.

The conception of the Python language started in the 80s, and it’s still an active language, with a big community.
Most major companies are using Python in their apps, like Google, Facebook, Netflix or Spotify.
So, it’s not an outdated language, learning it now could help you with your career or future projects.

In fact, it’s one of the most widely used Language in the world:

Statistic: Most used programming languages among developers worldwide, as of early 2020 | Statista
Find more statistics at Statista

You also use other languages like C++ on your Raspberry Pi, but in general, Python is the preferred option.

Philosophy

Tim Peters wrote the Python philosophy in twenty aphorisms like these:

Beautiful is better than ugly.
Explicit is better than implicit.
Simple is better than complex.
Complex is better than complicated.
Flat is better than nested.
Sparse is better than dense.
Readability counts.

It gives you an idea of what to expect when using Python.
One of the main goals is to keep it fun to use.

You could find the complete list on the official Python website.

Python and the Raspberry Pi

The goal of the Raspberry Pi Foundation is to help young students to learn how to code.
The Raspberry Pi foundation sent a lot of Raspberry Pi in the UK schools, and also created clubs to teach children how to code.

As you may have noticed, Raspberry Pi OS comes with Python by default and with a complete IDE already installed (in the Desktop version).
So if you have a Raspberry Pi and want to learn how to program, using Python is the natural way to do this.

By the way, it’s not mandatory to have a Raspberry Pi to learn Python. So don’t buy a Raspberry Pi only to learn Python.
You can do the same on any operating system, as Python is a cross-platform language.
You only need to find an editor to fit your needs on your current operating system.

Learn more about this story by reading this article: Why Is Python Used On Raspberry Pi? (3 huge reasons)

Install your operating system

If you don’t have already done this, you first need to install an operating system on your Raspberry Pi.
I recommend using Raspberry Pi OS Desktop, which comes with anything you need by default.
But any distribution can do the work if you prefer another one.

You can read my article on how to install Raspberry Pi OS on a Raspberry Pi if you don’t know how to do this.
If you don’t have a good workspace with your Raspberry Pi, I recommend enabling SSH and maybe installing Xrdp or VNC to remotely connect to your Raspberry Pi.
It may be more comfortable to read this article and to type code from your usual computer.

Once everything is fine with your installation, go to the next step.

Software to code in Python

You have two main possibilities to use Python on a Raspberry Pi.

Python IDE

On Raspberry Pi OS Desktop, the Thonny Python IDE is installed by default.

It’s a basic interface to write your code, save and run it, and see what happen in an integrated shell output.
Here is what you’ll get on the first start:

thonny python ide

This clean interface is intuitive.
In the top menu, you’ll find the most useful icons for creating a file, save or load it, launch it, as well as shortcuts for formatting the code.
Advanced actions are all hidden in the menu, to not disturb beginners.

The first text area is for your script and the second is a console to see what happens when you run your script (output or errors).

If you are just starting with Python or programming, I recommend working with this tool.
You’ll save time and, if you need something else later, that’s not a big deal to switch to another editor.

Any text editor

As I said in the introduction, Python can be run with a command like this:
python myscript.py

So, you can create the script file with any editor from nano to Eclipse if you want.
For beginners, I think that this will only add other issues and questions, but for big projects, a powerful interface could be really useful.

The most popular interfaces to code in Python are :

  • Code editors like Sublime Text, Visual Studio Code or Notepad++
  • IDEs like Eclipse with PyDev, PyCharm or Spyder
  • Specific Python editors like SPE

Any editor can do the job. You have the choice ?

If you are just getting started with Linux commands, you might be interested in this related article: How To Create A New Python File In Terminal On Raspberry Pi.

Basic samples to learn

Let’s start with your first lines of code.
On this part, you’ll learn the basic language syntax of Python.
This is not specific to the Raspberry Pi. It will work anywhere.

Hello world

This is a tradition when you study a new programming language, so we need to start with this.
How to display the famous “Hello World!” in Python?

It’s that simple:
print('Hello World!')

In the Thonny IDE, you should get something like this:

hello world in python

As you can see in the Shell area, the script displayed precisely what you put in the print function parameter.
Print is a primary function in Python that displays some text. They already code it for you, so you can use it directly.
The quotes around the text are a syntax convention, to identify strings in a line of code.

Variables

In any language, variables are used to store values locally and temporarily.
For example, you could ask the username at the beginning of your script and display it later in your code.

To achieve this, you need to define a variable and use it to store the username in it.

In Python, here’s how this example looks like:
username="Raspberry"
print('Hello '+username)

On the first line, we set the username variable with the ‘Raspberry’ string.
In most languages, you first need to create a variable, setting its type (a string, an integer, an array), before using it in the code.
In Python, there is no command to declare a variable. You can use it directly.

On the second line, we use the same print function as seen before.
I introduce a new syntax element with the ‘+’, used to concatenate strings.
When we ask Python to display ‘Hello ‘+username, it will display ‘Hello Raspberry’ instead.
The variable value is used as another string to display, stuck to the first part.

If you are following me, you should have noticed that this is not exactly the example I gave ?
Here is how to ask the username and display dynamically depending on the user response:

variables in python

The input function asks for an input value to the user and set it in the username variable.
Then you can display the variable as in the previous example.

We use a backslash to say Python that the following apostrophe is not to close the string.
You can also use double quotes to avoid this:
input("What's your name? ")

Conditions

Theory

The next step is to learn what are conditions and how to use them in Python.
A condition allows you to do something different depending on an expression (a variable value for example).

  • If the input string is empty, display an error
  • If the button is pressed, turn on the LED
  • If the password is correct: do the action, else: ask again

In most languages there are three conditions you can use, in this order:

  • If : first case
  • Elseif : other cases, tested only if the previous cases are all false
  • Else : default case if none of the conditions are true

For if or elseif, you need to define the condition associated and the code to execute if it’s true.
These conditions are called boolean statements. They are always true or false depending on your variables.
Else applies to any other cases, not described in if and elseif.

It will be easier to understand with an example in Python.

Python

In Python, you’ll find something similar, except that elseif is called elif

value=input("Value?")
if value == 'a':
    print("a")
elif value == 'b':
    print("b")
else:
    print("Anything else")

For each condition, the syntax is to use the main word (if, elif or else).
For if and elif you’ll find the boolean statement just after (value == “a”). It’s true if the value contains a false otherwise.
The else doesn’t have any condition, it will execute the code below if the value is anything else than a or b.
The “:” at the end of the line is here to indicate the end of the condition.

When you run this code, you can try to enter a, b or any other value when asked and see what happen.
Unlike the example in the previous paragraph, the display will be different depending on the input value you type.

Go further

The “elif” and “else” statements are optional.
If you have only one value to test, you could remove one part, like this:

value=input("Password?")
if value == '1234': 
   print("Access granted") 
else: 
   print("Try again")

If you have more than two values to test you can add as much elif as necessary:

value=input("Value?")
if value == 'a': 
   print("a") 
elif value == 'b': 
   print("b") 
elif value == 'c': 
   print("c") 
elif value == 'd': 
   print("d") 
else: 
   print("Error")

When the code below the matched condition ends, the script will continue after the end of the conditional group.
It will not try the other conditions.

In Thonny you should get something like that:

conditions with python

If you start today learning code, take time to digest this because the following is even more complicated ?
It’s a logic to learn, more than a language.
Don’t hesitate to make some tests on your side to be sure you understand this part.

Loops

Theory

The last concept I want to introduce is the loops.
Loops are a way to execute the same code portion several times.

Let’s take some examples:

  • As long as the password entered is not the good one, ask it again and again
  • For each file in a folder, do something
  • Infinite loop: Do the same thing every X minutes

This concept will allow us to have a dynamic code depending on something else.
It also avoids having several identical pieces of code, or to execute the script too often.

Python

In Python, you have only two ways to create loops:

  • For: Execute the code for each item in a sequence (list, range, string, …)
  • While: As long as your condition is true, the code will be executed

For those who know it from another language, there is no “foreach” instruction in Python. You have to use “for” instead.

While

I will start with “while” because it’s very close to the conditions we have seen just before.
As I said, it will run your code until the boolean statement becomes false.

Here is the same password example, with a loop:

password=input("What's your password?")
while password!="1234":
  print("Error")
  password=input("What's your password?")

print("Password correct")

We already know almost anything in this code.
We start by asking the password.
Then there are two cases:

  • The password is correct:
    • The script will never enter the while loop because the condition is false
    • In this case, it’s the same thing as an if
  • The password is incorrect:
    • The script will enter the while loop
    • It displays an error and asks again for the password
    • After that, the script come back to the “while” word, and try again the same boolean condition
    • This loop will never stop until the password is correct

Don’t forget to change the variables in the while condition inside the loop. Otherwise, you will create an infinite loop.

The execution of this script in Thonny with two password errors look like this:

while loop in python
For

For is something a little different.
You’ll use it for an already defined sequence of things, not depending on the user entry or something that evolves over time.

Here is one example:

alphabet= ["a", "b", "c"]
for letter in alphabet:
  print(letter)

On the first line, I introduce a new type of variables. It’s a list of elements (like an array in other languages).
The “for” syntax creates a new variable with the current item of your list (I call it “letter”).
Then you can use this variable in the loop code.

On Thonny you will get this:

loop for in python

As you can see, the code is executed three times, once for each letter.
I use only one line, but there is no limit, there could be 300 lines.

Go further

I only gave you the basic to introduce the loops.
There are many variable types and functions you could use to fit your needs with loops.

Here are some examples:

  • range(0,10): to execute a loop from 0 to 10
  • range(0,100,3): to execute a loop from 0 to 100 but incrementing x by 3 each time
  • string: to browse letters from a string

You could find more information on the official Python wiki.

I don’t want to lose everyone here, but there is one last thing that you may need with these loops.
I suggested creating an infinite loop with a clock in the introduction, but I didn’t explain to you how to wait a certain amount of time at each run.

Here is how to do this:

import time;

password=input("What's your password?")
while password!="1234":
  print("Error")
  time.sleep(10)
  password=input("What's your password?")

print("Password correct")

As you can see it’s the same example as above with the password.
We introduce here a 10s wait time before trying another password (for security reasons for example).

To code this we need to use a Python library and call it with the import syntax.
This library will provide you with new functions you can use in your script.
And so, we use time.sleep in the loop, to wait for an extra 10s before asking for a new password.

There are many Python libraries you can use like this one.
We’ll see some of them in the next paragraph, but don’t forget to search for them before making a code that someone already made.

Code for Raspberry Pi

Ok, now that we have seen or reviewed the basics of Python programming, we’ll be able to focus on our main goal: the Raspberry Pi projects we could do with some basic Python skills

Control your camera

If you have a camera on the camera port of your Raspberry Pi, you can try to control it with Python.
There is a library named “picamera” that allows you to use your camera in a Python script.

Here is a basic sample including the main functions:

import picamera
with picamera.PiCamera() as camera:
    camera.start_preview()
    camera.capture('/home/pi/Images/python.jpg')
    camera.stop_preview()

This script will take one shot each time you run it, and save the picture in the specified folder.
Don’t forget to import the picamera library at the beginning of the script.
Then you can use start_preview to start the camera, capture to shoot the picture and stop_preview to stop the camera.

I made an entire article about cool things to do with a camera on Raspberry Pi.
Feel free to read it if you want other examples.

GPIO Pins

Another great feature from the Raspberry is the GPIO pins you’ll find on the board.
These pins allow you to create an electronic circuit with components like LEDs, buttons or whatever.
You can control GPIO pins and circuits in Python.

I’m not an expert in that kind of stuff, so I will give you a short example using the GPIO Zero library. And if you want to learn more, you can check my dedicated guide on the topic.

from gpiozero import LED
from time import sleep

led = LED(17)

while True:
    led.on()
    sleep(1)
    led.off()
    sleep(1)

At the beginning of the script, we need to import two libraries (gpiozero for LED management and time for the sleep function we saw before).
Then we set the GPIO pin to use for the next stage of the script.

And finally, we create an infinite loop which makes the LED blink every second.

This entire example doesn’t use many more concepts than those seen in this article.

There are other libraries similar to gpiozero you could use, like RPI.GPIO, pigpio or wiringPi.
If you start, gpiozero may be simpler to understand how it works.

Prerequisites

To start on this kind of electronic projects, you’ll need some components to create your circuit.

I recommend you to get a kit like this one on Amazon with all the needed stuff.
Even if you think that there are too many things for you in it, it’s so cheap that you can take it directly.
You could use it on your next projects ?

If you don’t have a Raspberry Pi yet, Canakit also offers a kit with the Raspberry Pi and some components to get started with electronic circuits
It might be a good deal to start (check the price on Amazon).

Play with robot kits

Robotics is a great way to learn Python while having fun with your Raspberry Pi. A lot of good robot kits are available on Raspberry Pi (check the link to see my favorites). You’ll not only use the camera and the GPIO pins, but also various sensors (distance, colors, etc.) and make them move by using various motors.

If you are confident, you can get a basic level in Python, I highly recommend giving it a try, it’s one of the funniest project for any Raspberry Pi user. And even if you think Python is hard, most of them have a way to make it work without it (with easier languages, like Scratch and similar visual languages or even smartphone apps).

Related questions

Why is Python used in Raspberry Pi? Python is the favorite language on Raspberry Pi because everything is already included. As soon as you install your system, you get all pythons prerequisites installed, an IDE and all needed libraries for your Raspberry Pi.

More details here.

Should you learn Python as a first coding language? There are more or less complicated languages to master. Python is one of the easiest to learn. So, it’s not a bad choice. You’ll also learn the basics of algorithmic that will help you switch to another language next.

Could you use other languages on the Raspberry Pi? If your main goal is to develop things on your Raspberry Pi, there are many other languages you could use on it. All languages able to compile on the ARM chip can be used (C, C++, Scratch). You could also take a look at web languages (HTML, PHP, JavaScript).

Want to chat with other Raspberry Pi enthusiasts? Join the community, share your current projects and ask for help directly in the forums.

Conclusion

Here we are.
I hope you learned many things about Python and what you can do with it on Raspberry Pi.

Coding requires practice.
If you start learning how to program today, you’ll not be able to make something perfect the first time.
You have to try things, learn other and especially do not stop there.
If you do nothing in Python in the two next weeks, you will forget everything :/

If you need more ideas to experiment with your new Python skills, I have a good list on this page.

Additional Resources

Not sure where to start?
Understand everything about the Raspberry Pi, stop searching for help all the time, and finally enjoy completing your projects.
Watch the Raspberry Pi Bootcamp course now.

Master your Raspberry Pi in 30 days
Don’t want the basic stuff only? If you are looking for the best tips to become an expert on Raspberry Pi, this book is for you. Learn useful Linux skills and practice multiple projects with step-by-step guides.
Download the e-book.

VIP Community
If you just want to hang out with me and other Raspberry Pi fans, you can also join the community. I share exclusive tutorials and behind-the-scenes content there. Premium members can also visit the website without ads.
More details here.

Need help building something with Python?
Create, understand, and improve any Python script for your Raspberry Pi.
Learn the essentials step-by-step without losing time understanding useless concepts.
Get the e-book now.

You can also find all my recommendations for tools and hardware on this page.

How to Learn to Program in Python with a Raspberry Pi

Learning to program in Python with a Raspberry Pi can be a great way to get started with coding and computer science. The Raspberry Pi is a small, affordable computer that can be used for a variety of projects, from creating a media center to building a robot. With the Raspberry Pi, you can learn to program in Python, a powerful and popular programming language.

Step 1: Get a Raspberry Pi

The first step to learning to program in Python with a Raspberry Pi is to get a Raspberry Pi. You can purchase a Raspberry Pi from a variety of online retailers, or you can find a local store that sells them. Once you have your Raspberry Pi, you’ll need to set it up. You can find instructions for setting up your Raspberry Pi online.

Step 2: Install Python

Once your Raspberry Pi is set up, you’ll need to install Python. Python is a programming language that is used to create programs and applications. You can find instructions for installing Python on your Raspberry Pi online. Once you’ve installed Python, you’ll be ready to start programming.

Step 3: Learn the Basics of Python

Before you start programming with Python on your Raspberry Pi, you’ll need to learn the basics of the language. You can find tutorials and resources online to help you learn the basics of Python. Once you’ve learned the basics, you’ll be ready to start programming with Python on your Raspberry Pi.

Step 4: Start Programming

Now that you’ve installed Python and learned the basics, you’re ready to start programming with Python on your Raspberry Pi. You can find tutorials and resources online to help you get started. You can also find a variety of projects that you can use to practice your programming skills. With practice and dedication, you’ll be able to create your own programs and applications with Python on your Raspberry Pi.

Jaspreet Singh Ghuman

Jaspreet Singh Ghuman

Jassweb.com/

Passionate Professional Blogger, Freelancer, WordPress Enthusiast, Digital Marketer, Web Developer, Server Operator, Networking Expert. Empowering online presence with diverse skills.

jassweb logo

Jassweb always keeps its services up-to-date with the latest trends in the market, providing its customers all over the world with high-end and easily extensible internet, intranet, and extranet products.

Contact
San Vito Al Tagliamento 33078
Pordenone Italy
Item added to cart.
0 items - 0.00
Open chat
Scan the code
Hello 👋
Can we help you?